Shopping Cart
now in your cart (0) items   |   View Cart   |   Checkout

Shop 3, 31 Elgar Road, Derrimut VIC
(03) 9028 5151

Product Search
 
Loading TreeView Menu
 

Shop with peace of mind



Secured by
128-Bit SSL Strong Encryption






Shopping.com



DIY Tools Store Information, Rating and Reviews at MyShopping.com.au



Comparison Shopping Australia - Certified by Getprice


 
Product Details

550W Stainless Steel Submersible Dirty Water Pump (DWP003)

550W Stainless Steel Submersible Dirty Water Pump (DWP003)

Specifications:

  • Rated Power -- 550w
  • Max. Delivery Capacity  -- 10000 ltr per hr
  • Max Pressure -- 0.75 Bar
  • Max Head* -- 7.5 mtrs
  • Max Submersion depth: 8m
  • Flat Submersion Height Approx: 5mm
  • Cintaminated water with particle size of max: 5mm
  • Min water level for operation: 7cm
  • Max. media temperature: 35°C
  • Cut-in height: 53cm
  • Cut-out height: 5cm
    (Please note: The cut-in and cut-out height vary.  The indicated values are average values and are not valid when the floats switch is not fixed to the float switch lock)
  • Hight Of The Pump ::14 inches
  • Size of the base of the pump 6inches round

* Max head is the maximum height the pump can pump vertically. If you need to pump higher than that, we recommend that you purchase a bigger pump.

Contents:

  • Fitting for hose connection.
  • Fitting for direct pipe connection.
  • Float switch turns on and off automatically.
  • 240 volt conenction.
  • Long 10m power cord.
  • Stainless Steel body.
  • This pump is fully submersible (waterproof sealed) to a depth of 8m.

This submersible pump has been designed for private use around the house and garden.  This submersible pump is predominately used for draining after flooding, transfer of liquids, draining containers, taking water from wells and shafts, draining boats and yachts as well as for water aeration and circulation for limited period of time.

 

This pump is fully submersible (waterproof sealed) and can be submerged down to a depth of 8m into liquid.

 

Liquids which can be handled by the submersible pump are the following clean or slightly contaminated water (max. particle size 5mm), swimming pool water (prerequisite is the recommended dosage of additives) and soapy water.

 

Corrosive, easily combustible or explosive substances (e.g. gasoline, petroleum, nitro thinner), fats, oils, salt and waste water of toilets and urinals must not be pumped.

 

The temperature of the liquid handled should not exceed 35 degrees Celsius

 

This pump is not designed for continuous operation (e.g. continuous circulating operation); the pumps life will be shortened correspondingly by such operation.

 

 

Design and e-commerce solution provided by My Online Business.